This series of crusher are widely used in metallurgy, mining, chemical, cement, coal gangue, construction, sand, refractory material, ceramic and other industrial and mining enterprises, engaged in breaking and crushing the material in the operation. Used for tertiary or quaternary crushing, it is mainly suitable for crushing various ores the compressive strength of which is no more than 320MPa.
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. It consists mainly of frame, rotor, hammers and grizzly bars and other components. The frame includes upper part and lower parts, which are welded by steel plates after cutting, the remaining parts bolted into one. High manganese steel liners are studded with inside the frame, to facilitate replacement for a new liners after worn; on the main shaft are installed several groups of the spindle distribution of the hammers, which consists of rotor with the axle of hammers and rotary table.
The host drives the main shaft through the motor and V-belt driven spindle to rotate the rotor, generating the centrifugal force, and then driving all hammers stretch around. The bulks of material feed into the crushing chamber will be crushed by the hammers at a high-speed movement. The broken material requested will be passed the grizzly bars at the lower part and discharged, the unbroken rest will be left in the chamber to be crushed repeatedly by the hammers and iron plates until it can reach the requested standard. To avoid clogging, the water content of the material to be crushed not more than 5%.
Building materials are the basis of the buildings and structures, road building materials for all parts of the road bed, pavement, bridges, tunnels and other various components and structures. The hammer crusher application is wide in processing building materials for construction like above. With the large-scale expansion of China"s highway construction, road building materials use and development of speed is also faster and faster, traditional building materials are widely used in foundation engineering, but have been increasingly unable to meet the rapid development of highway construction on standard engineering requirements. So the demand for hammer crusher has been increased greatly. High quality building material needs good performance jaw crusher. Hongxing Machinery hammer crusher has been applied to construction, chemical industry, and light industry and so on.
After building materials and solid materials are crushed, the internal crystal structure changes, the surface and the unit mass can increase, can improve the speed of physical and chemical reaction, easy mixing and improve homogenization, and create favorable conditions for drying, storage and delivery. This is the reason why it is popular in construction industry. Hongxing Machinery impact crusher application is wide also because of high quality crusher hammer and rotor. This machine can meet different crushing request of construction material.
Henan Hongxing Mining Machinery Co., Ltd is a large-sized preheater, calcining kiln manufacturer, and the mining equipment we researched and developed with great concentration plays an active role in the mining and ore beneficiation industry and is one of the indispensable mining crushing equipment in the mining industry.